SD-501 Repeatability：Less Than 5µ Hysteresis：Less Than 1µ Applicable Temperature Range：0∼50°c Response Speed：Less Than 10ms Stop Signal Output：Relay Contacts(A、B)250V3A Supply Voltage：AC220V，50/60HZ±10% Size of Main Unit：105 X 140 X 185(W X H X D) Number of Sensor：1 Size of Sensor：30 X 8 X 20(W X H X D) Length of Sensor：10cm Length of Joint Cable：3m Gap Between Sensor And Proximity Element：1mm±0.5mm Max. Operating Speed：2000S.P.M.

In parts punching operations, when the materials are fed into the mold, theremay be a position error between the material release platen and lower platen, resulting from parts stacking, chips, uneven material thickness, abnormality inside the mold, of insufficient material feed. The problems used to be difficult to detect, but now there is a computerized detector which can accurately detect variations. The value is displayed on the detector panel.

---

	Features： Plates can be take off one by one, this mechanical operation can upgrade your working efficiency. Can be taken off smoothly even from oil stained plates, no harm will cause to your hands. The continuous operation is ensured regardless of plates vary in sizes, shapes, weights, numbers, also can be folded in operation conveniently.
Model Size Length Width Height G2 2015 200 150 50 G1 1210 120 105 50